Presentation is loading. Please wait.

Presentation is loading. Please wait.

生产件批准程序 Production Part Approval Process (PPAP)

Similar presentations


Presentation on theme: "生产件批准程序 Production Part Approval Process (PPAP)"— Presentation transcript:

1 生产件批准程序 Production Part Approval Process (PPAP)

2 PPAP is to demonstrate supplier’s understanding of: PPAP是为表明供应商怎样理解以下内容的一个过程:
零件的功能 Part’s functionality 零件的特性 Part’s Characteristics 特性的关键性 Criticality of features 怎样测量零件 How to gauge the part 生产要求 Production requirements - 零件的用法 Part’s Usage - 相关的项目 Associated programs - 车辆 Vehicle - 型号年份 Model Year (MY) 工程图纸要求 Engineering drawing requirements 工程规范 (ES) 材料特性 Material Characteristics 材料处理(热处理, 外观) Material Treatment (Heat Treat, Appearance) 安全特性 Operator Safety features, if any 关键特性 Critical Characteristics 重要特性 Significant Characteristics 高影响的特性 High Impact Characteristics 传递特性 Pass Through Characteristics 使用哪些最为合适的量具 What most suitable gauges to use? - 计量型量具 Variable gauges - 计数型量具 Attribute gauges 基准 Datum 测量方法和装配工厂存在相关性 Measurement Correlation with using plants 何时需要? When needed? 哪里需要? Where needed? 多少数量? How much? -按节拍生产 Run at Rate -生产能力确认 Capacity Verification

3 Application 什么时候用到PPAP?
PPAP is required for, but not limited to: PPAP对以下情况适用(但不局限于): All new tooled parts (使用新模具生产零件) All new vehicle programs and "running changes" for vehicles currently in production (新车型,或者是对现有车型的变更) Any change in supplier operating pattern (i.e. new shift) (生产模式的变更) Any additional, modified or reconfigured production tooling, equipment or work streams (模具,设备或生产线的增加,改造或重新装配) Revised customer DPV (Daily Production Volume) exceeding verified supplier capacity level (客户需求量的增加)

4 Content 内容 Phased PPAP introduction 阶段性生产件批准程序的介绍
Ford special requirements to PPAP 18 elements. 福特汽车对于生产件批准18个项目的要求。 VPP usage VPP的使用方法

5 阶段性生产件批准程序 PHASED PPAP PROCESS

6 What is the Phased PPAP? 什么是Phased PPAP?
Phased PPAP is Ford’s approach to PPAP process management Phased PPAP是福特特有的生产件批准管理程序。 Introduced to improve upon launch performance 用来提高项目开发和实施的表现。 Requires a supplier site to demonstrate Manufacturing capability (制造能力) Product quality (产品质量) And production capacity (产能) …prior to job #1 (在J#1之前)

7 Phased PPAP vs the old PPAP Phased PPAP与PPAP的比较
Phased PPAP Phase 0 Phase 1 Phase 2 Phase 3 X 1 PP FEU Job 1 Phased PPAP organizes the process into four phases Phase 0: Run-at-Rate Phase 1: Quality Verification Phase 2: Production Verification Phase 3: Capacity Verification

8 Supplier Phased PPAP Process Map 阶段性生产件批准程序示意图
INPUTS Released design [#1,2,3 & 4] Trained supplier production operators Sub-supplier(s) material status from Tier-x Job 1 Location (final site & line) Quantity of parts required as defined by customer (default 300 consecutive parts) Production process including control plan, flow diagram instructions & Process parameters [#5,6 & 7] Tools, Facilities & Gauging [#8,16 & 17] EVENT: Conduct Run at Rate Planned cycle times required to support Daily Volume Outputs from the event STATUS: Phase 0 Completed Implement Corrective Action on Input Was the Pre-Launch Control Plan followed? Were the prescribed number of acceptable parts produced? parts produced in the defined period? Did all operations meet their planned cycle time ? Yes No Are the input requirements in place for the production stream? START Capacity Analysis Worksheet Status Tracking Database 1 4 Proceed to next page Required Inputs Submit to Customer Note: [#x] refers to the Element Number in PPAP 4th Edition that will assist in confirming requirements STATUS: Phase 1 Completed Continue Production Part Approval Process (PPAP) using parts from Phase 0 - Dimensional measurements [#9] - Material Tests [#10] - Statistical process package [#11] - Performance Tests [#12] - Appearance criteria [#13] - Sample parts [#14] - Master samples [#15] - Customer Specific Requirements[#17] - as defined by PPAP Have the PPAP elements been satisfied? Yes Status Tracking Database 1 4 2 Important note: For suppliers with only one production stream completion of Phase 1 & 2 occur at the same time Proceed to next page Return to Phase 0 for corrective action No Submit to Customer Warrant [#18] Phase 2 Warrant Scheduled down time defined (TPM, change over, Breaks etc.) Sub supplier material status from Tier-x Phase 3 EVENT: Conduct Capacity Verification Run STATUS: Completed Quantity required is customer DPV for one full day All personnel for all shifts, trained Are the CVR input requirements in place for all production streams? Yes END Status Tracking Database Return to affected phase and start corrective action [#18] & Capacity Analysis Report Determine Root Cause & Plan Corrective Action Was the control plan followed & acceptable parts produced? Did the volume of acceptable parts produced meet or exceed the required DPV? No 3 Required Inputs Phase 0 Phase 1 Have Run-at-Rates (Phase 0) been conducted and Quality Verifications (Phase 1) been satisfied for ALL production streams? 2 Yes STATUS: Completed Phase 2 3 No Proceed to next page Warrant Phase 2 [#18] Submit to Customer Status Tracking Database Important note: concurrently if all Inputs and Phase 2 and Phase 3 can happen Outputs are satisfied 4 Phase 0 Run-at-Rate Phase 1 Quality Verification Phase 2 Production Verification Phase 3 Capacity Verification 1 - Design Records 2 - Engineering Change Documents 3 – Customer Engineering Approval 4 - Design FMEA 5 - Process Flow Diagrams 6 - Process FMEA 7 - Control Plans 8 - Measurement System Analysis Studies 16 - Checking Aids 17 - Customer-Specific Requirements 9 - Dimensional Results 10 - Records of Material / Performance Test Results 11 - Initial Process Studies 12 - Qualified Laboratory Documentation 13 - Appearance Approval Report 14 - Sample Production Parts 15 - Master Sample 18 - PPAP Warrant Run-at-Rate for all production streams (element 1 – 8, 16, 17) PPAP Warrant (element 18) Capacity Analysis Report Quality Verification for all production streams (element 9 – 15) PPAP Warrant (element 18) Capacity Analysis Report

9 Phase 0: Run-At-Rate (按节拍生产)
Start Released Design [#1, 2, 3, 4] Trained supplier production operators Sub-supplier(s) material status from Tier-X Run-at-Rate Quantity of parts required as defined by customer (default 300 consecutive parts) Job 1 location (final site and line) Production process including control plan, flow diagram instructions, and Process Parameters [#5, 6, 7] Production tools, facilities, and gauging [#8, 16, 17] Planned production cycle times required to support daily production volume Are the Run-at-Rate input requirements in place for the production stream? Was the pre-launch Control Plan followed? Were the prescribed number of acceptable parts produced? Were the parts produced in the defined period? Did all operations meet their planned cycle time? Implement corrective action on input EVENT: Conduct Run-at-Rate STATUS: Phase 0 Complete Capacity Analysis Report Status Tracking Database 4 1 YES NO Submit to customer Outputs from the event

10 Phase 1 Prerequisites (Phase 1的先决条件)
In order to begin Phase 1, the following are required: 要进入Phase 1,必须达到以下条件: Successful completion of Run-at-Rate (Phase 0) for at least one work stream 对至少一条生产线成功完成节拍生产 Capacity Analysis Report completed for at least one Job1-intended production work stream 对至少一条生产线成功完成产能分析 Tier “X” successful completion of Phase 1 分供方完成了Phase 1 PPAP.

11 Phase 1: Quality Verification (质量验证)
Continue Production Part Approval Process (PPAP) using parts from Phase 0 Dimensional measurements [#9] Material tests [#10] Statistical process package [#11] Performance tests [#12] Appearance criteria [#13] Sample parts [#14] Master samples [#15] Customer-specific requirements [#17] As defined by PPAP Have the PPAP elements been satisfied? STATUS: Phase 1 Complete YES 1 2 NO Phase 1 Warrant [#18] Submit to customer Status Tracking Database Important note: for suppliers with only one production stream, completion of Phase 1 & 2 occur at the same time. Return to Phase 0 for corrective action 4 4

12 What is required to get Phase 1 PSW approval? 获得Phase1 PSW的条件

13 Input Requirements (Phase 2的先决条件)
Phase 2 requires the following (Phase2需要以下条件): All Job 1 intended production work streams have successfully completed Run-at-Rate (所有生产线都成功完成了节拍生产) Capacity Analysis Reports completed for all Job 1 intended production work streams (所有生产线都成功完成了产能验证) Tier ‘X’ successful completion of Phase 2 (分供方完成Phase 2 PPAP). Page 51 – Define Tier X and include note requesting add’l info for script due to sound

14 Phase 2: Production Verification (生产验证)
Have Run-at-Rates (Phase 0_ been conducted and Quality Verifications (Phase 1) been satisfied for ALL streams? STATUS: Phase 2 Complete YES 2 3 Phase 2 Warrant [#18] NO Submit to customer Status Tracking Database Slide 26, and 28-29, the “1” in the small circle is replaced with “2” - COMPLETE Important note: Phase 2 and Phase 3 can happen concurrently if all inputs and outputs are satisfied. 4

15 Phase 3: Capacity Verification
Are all personnel for all shifts trained? Quantity required is customer DPV for one full day Phase 2 Warrant Scheduled down-time defined (TPM, change-over, breaks, etc.) Sub-supplier material status from Tier ‘X’ Phase 3 Are the CVR input requirements in place for all production streams? Was the production control plan followed and acceptable parts produced? Did the volume of acceptable parts meet or exceed the required DPV? Determine root cause and plan corrective action EVENT: Conduct Capacity Verification Run STATUS: Phase 3 Complete Phase 3 Warrant [#18] & Capacity Analysis Report Status Tracking Database YES Submit to customer Outputs from the event NO End Return to affected phase and start corrective action Complete Capacity Analysis Worksheet Phase 0 Phase 1 Phase 2 Phase 3 3 Slides 32-40, the “2” in small circle is replaced with “3” and the overall box surrounding the process content should be a straight-sided rectangle and not have an arrow on the right edge/border - COMPLETE

16 Ford Special Requirements to PPAP 18 Elements 福特对生产件批准18个要素的要求

17 Design Record 设计记录 The design must be released and authorized by Ford D&R. 总成图必须获得福特设计工程师的批准,并在福特系统中(WERS)发布。 Where the design record is in electronic format, the organization shall produce a hard copy (e.g., GD&T drawing) to identify measurements taken. 当设计记录(如CAD/CAM数模、零件图纸、技术规范)是以电子格式(如数模)存在时,供应商必须复制一份硬拷贝(如示意图、几何尺寸和公差表、图纸)以标识测量的内容。 Engineering change level properly indicates the latest design change. 工程变更等级必须符合最新的设计变更状态 For FSS, if the parts are identified as black box, the design record should at least specifies the interface and performance requirements. (e.g. Vehicle Assembly Position). 对全服务供应商,对于定义为黑盒子的零件,设计记录要规定和其他件配合的关系和性能要求。

18 2. Engineering Change Documents 工程变更文件
SREA signed by CFT. 《供应商工程变更申请》 WERS Concern. - 如果有权限进入WERS,供应商可以通过WERS Concern来提交设计变更 - 福特提出的设计变更通过WERS Concern来通知供应商和内部相关人员 WERS = World Engineering Release System

19 3. Customer Engineering Approval 客户工程批准
The organization shall obtain documented Ford Product Development engineering approval of DV (Design Verification) and PV (Production Validation) tests of the initial sample parts. 供应商必须获得福特PD部门对D/PVP&R的书面批准。 The organization shall conduct the PV testing on parts/products which were produced at “run at rate”. (使用节拍生产出来的零件进行PV试验) Where appropriate, Ford Engineering records initial sample part approval on the ESER/ESO. 工程批准的方式可能有很多:ESER, ESO, DVP&R… WERS Alert for Interim-Approval. 临时批准需要有WERS Alert支持。

20 4. DFMEA 设计不良模式效应分析 When developing FMEA, the requirements of Ford FMEA handbook (special characteristic definition) shall be met. 有产品设计职责的组织,必须按照福特的FMEA手册开发设计FMEA。 For parts with YC/CC, DFMEAs must be approved in writting by Ford D&R engineer. 如果零件有关键特性(YC/CC,车辆安全规范或政府法规控制),DFMEA要获得福特设计工程师的书面确认。 Ford reserves the right to review and approve all organization-developed DFMEAs. 福特保留审核和批准供应商开发的DFMEA的权利。 Over patent concerns, sometimes, supplier does not wanna share DFMEA, we could review it at the supplier site or have the supplier bring them to our office. (现场审核DFMEA硬拷贝)

21 5. Process Flow Diagram 过程流程图
制造过程绘制 Mapping the Manufacturing Process. 组队 Organize the team 制作过程流程图 Develop A Process Flow Diagram 确定每一过程的偏差来源 Identify sources of variation in each process 结合经验教训 Incorporate lessons learned 记述各个步骤的目的 Describe purpose of each step

22 5. Process Flow Diagram 过程流程图
Op编号 Op No. 偏差来源 Sources of Variation 操作描述Operation Description (Purpose of Op.) Op.标记 Op. Symbol 产品特性 Part Characteristic 过程特性 Process Characteristics 制造 移动 储存 检测 make move deposit inspect

23 6. PFMEA 过程FMEA 不产生功能 产生部分功能 出现不需要的功能 哪些方面可能会出现错误? 如果发生了会怎样!产生什么影响?
General Procedure to develop PFMEA: 编制过程FMEA的一般流程 Ask the questions: 哪些方面可能会出现错误? What can go wrong? 如果发生了会怎样!产生什么影响? So what !!! Effect ? 不产生功能 No function 产生部分功能 Partial 出现不需要的功能 Unintended function 原因? Cause (s)?

24 6. PFMEA 过程FMEA 当此情况发生需要采取何种措施? 来预防故障 来发现故障 假如还不够, 那么: 还需要做什么?
General Procedure to develop PFMEA: 编制过程FMEA的一般流程(续) 当此情况发生需要采取何种措施? What do we do when this happens? 来预防故障 To prevent the failure 来发现故障 To detect the failure 假如还不够, 那么: If that is not enough, then: 还需要做什么? What else need to be done?

25 6. PFMEA 过程FMEA 哪些需要被控制 对于产品和过程来说哪些是关键的? 怎样来控制这些
Process FEMA Output 过程FEMA 输出: 哪些需要被控制 What needs to be controlled 对于产品和过程来说哪些是关键的? What is critical in the product & the process 怎样来控制这些 How to control these things

26 6. PFMEA 过程FMEA If DFMEA does not exist, the team must have a meeting with the Design Engineer - using the CRT approach. 如果没有DFMEA,供应商需要和福特设计工程师确定关键特性和显著特性的清单。 For parts with CC, PFMEAs need to get Ford Engineering & STA Approval. 对有关键特性的零件,PFMEA要获得福特PD和STA的批准。 Characteristic traceability is required from the DFMEA through the PFMEA to the Control Plan (Supp.K) 要保证特殊特性在各个文件中的一致性。 Error Proving list is one output of PFMEA. 防错清单是PFMEA的一个重要输出。 PFMEA is living document. (8D, SREA…) PFMEA要不断更新。

27 7. Control Plan 控制计划 对过程按从开始到结束的逻辑顺序 说明产品特性及过程参数 对什么进行控制及怎样控制
Documenting the logical order of processes, start to finish 说明产品特性及过程参数 Specify product characteristics and process parameters 对什么进行控制及怎样控制 What to control & how 何时进行控制及控制程度 When to control & how much 如遇故障,下步需做什么 What to do, if all failed

28 7. Control Plan 控制计划 CC/SC list is properly cascaded in to CP.
控制计划要体现对特殊特性的有效控制。 Incoming Inspection is the 1st part of CP. 来料检验是控制计划的第一部分。 The Reaction Plan should be evaluated for effectiveness and use. 评估应变计划以验证其有效性 Lists all process parameters and part characteristics that require specific quality planning actions. 对产品特性和过程特性都要规定有效的控制措施 STA approval. STA批准(对CC件,要获得福特PD和STA批准) Living documentation. (根据变更和8D更新控制计划)

29 Production Control Plan Instructions/Visual Aids
Potential Critical Characteristics and Significant Characteristics Identified DFMEA DVP & R PFMEA DVP&R Pre - Launch Control Plan Production Control Plan Prototype Control Plan Modification of PFMEA (as required) Standard Work Instructions/Visual Aids Process Flow Diagram Employee & Customer Safety Government Regulations Design Field Actions Warranty Customer Concerns Actual Critical Characteristics and

30 8. Measurement System Analysis 测量系统分析研究
All gauges (both general or dedicated) in Control Plan. 无论测量系统的类型是什么,用于检查福特产品的所有量具,都需进行量具再生/再现性分析。 MSA 3.0 based. 基于MSA3.0版本 Associated % tolerance and % study variation. 在总偏差中的量具误差占公差的比例和过程变差的比例。 To variable gages, the parts used for the Gauge R&R study must be within Design Record specifications. 对计数型量具,用于MSA的零件必须符合设计规范。 The acceptance criteria for Gauge R&R as a percent of TOLERANCE is less than 10%. If %tolerance is over 10% customer approval is needed. The Gauge is unacceptable if % tolerance is over 30%. NDC more than 5. ANOVA Method preferred with Minitab. (优先使用方差方法)

31 9. Dimensional Results 全尺寸报告
Dimensional Measurements to compare the actual part with the drawing (bubble prints). Default are 3 parts measured (5 pcs preferred). 比较实际零件是否符合设计记录的要求,默认三件。 If production parts will be produced from more than one cavity, mold, tool, die, pattern or production process, a dimensional evaluation on one part from each should be completed. 对于每个独立加工的过程,如:生产单元或生产线,和所有的多模腔、成型模、模型或冲模,都必须有全尺寸测量结果。 Make one of the parts measured as "Master Sample“. 将其中一个零件作为标准样品

32 10. Material/Performance Test Results 材料/性能试验结果的记录
Where Ford specifies that materials are to be purchased from an approved supplier, the organization should contact the buyer to determine appropriate materials suppliers. 对特殊材料必须选择福特指定的供应商。 Ford PD is supposed to approve the PV test plan, and to sign the PVP&R. PV试验计划要获得福特PD的确认。PV试验成功完成后,PD要在PVP&P上签字。 All PV test requirements are clearly identified in the DVP&R. (PVP&R) D/PVP&R中必须规定试验设备。 PV testing is supposed to use run at rate parts. PV试验的零件来自节拍生产 All test equipment used for PV Testing is available and in the appropriate location (fully calibrated and certified). 试验设备要经过校准和确认。

33 11. Initial Process Study 初始过程研究
MSA should be conducted before Ppk study. 在进行初始过程研究之前,必须确保量具已经做过MSA。 Ppk is required for Initial Process Study, SCs and CCs must meet at minimum 1,67 Ppk. 特殊特性要满足Ppk>=1.67的要求。 Focus on variables data. 针对计数性数据 If Ppk < 1.67, Error Proofing or 100% Inspection is required. 如果不能满足Ppk>=1.67的条件,必须采用防错或者100%检测来控制该特性。

34 Cpk or Ppk? Cpk is to determine if the process is capable to meet specifications, and is a prediction of what your process can do. The process has to be in statistical control. At leat 100 individual samples available. when you can't determine statistical control or if you are looking at a very short production run, Ppk should be used.

35 12. Qualified Lab Documentation 合格的实验室文件
The qualified laboratory (internal or external) shall have a laboratory scope and documentation to show it is qualified to conducted the inspection and testing for PPAP. 组织必须有一份实验室范围和说明所使用的实验室遵循的证明文件。 The external laboratory shall be in compliance with the latest ISO/IEC (or national equivalent). 外部实验室要符合最新ISO/IEC 17025的要求 (或所在国等同要求)

36 13. Appearance Approval Report 外观批准报告
All parts/products having appearance criteria shall be reviewed and approved by the appropriate Ford activity (Design Quality). 当产品和零件在设计记录上有外观要求且要求提交时,则每一个零件或零件系列都必须填写一份单独的外观批准报告(AAR)。 Appearance approval includes, but is not limited to: overall appearance, surface quality, color, texture, and gloss. 外观批准包括整体外观,表面质量,颜色,皮纹和光泽度等等。 Visual "match-to-master" is the specified requirement for AAR sign-off. Numeric evaluations should only be used for on-going quality control after visually acceptable parts/products are attained. AAR是福特精致工艺部门参照外观标准对零件的视觉比较(主观的)。计量型评价方法只可以作为生产过程控制的方法来使用,但必须在获得AAR之后。 AAR plan and Pre-AAR.

37 14. Sample Production parts 生产件样品
Customer defines the quantity. 客户规定生产件样品的数量。 Sample Parts are needed for the parts functioning in the Vehicle or Powertrain Assembly。 生产件样品用来在整车厂或发动机厂作功能性装车试验。 Photos as evidence is acceptable. 可以使用照片作为证据。

38 15. Master Sample 标准样件 Master sample which is retained in the supplier’s site for reference. Master sample has the same life as PPAP package. 标准样件由供应商负责保管,保存期与生产零件批准文件的保存期相同 。 Supplier shall retain a master sample from each position of a multiple cavity die, mold, tool or partern, or production process unless otherwise sepcified by the customer. 组织必须保存一份由多腔模具、铸模、工装、仿形模或生产过程的每一腔模具生产的样件。 Customer (STA&PD) signature with approval date. 标样必须标识顾客批准标样的日期。 Dimensional Result is required form Master Sample 标准样件要有全尺寸报告

39 16. Checking Aids 检查辅具 Gauge strategy and drawing approved by customer. 专用检具和特殊工装的图纸。检验辅具可以是零件专用检具,包括卡具、量规、模形、模版及聚酯薄膜。 The gauges are to the latest design level. 检具必须符合零件的最新设计状态。 MSA study to checking fixtures is required. 对专用检具要做MSA分析。

40 17. Customer Specific Requirements客户特殊要求 -Packaging Approval 包装批准
Expendable Package VS. Returnable Dunnage. 一次性包装 VS. 可回收包装 Forms: 表格 - FoE&FAP: FORM 1121 (via FSBC) 福特欧洲和亚太:1121表 (福特澳洲通过FSBC提交) - NA: FORM 150E 福特北美:150E表 Trial shipment that simulates the production logistics process. (Water Shipment Trial for exporting suppliers) 如果使用福特指定的物流商,供应商需要完成海运试验来支持包装批准。

41 17. Customer Specific Requirements - Capacity Verification (产能验证)
Measure the ability of a supplier to meet Ford Motor Company’s Capacity Planning Volume (CPV) with quality parts, on time. 目的是验证供应商能否满足福特产能的要求。 Capacity verification to each work station to identify the bottleneck process 产能验证要细化到每个工位来识别瓶颈工序。 CPV information should be provided by buyer. 福特采购部门提供计划产能信息。

42 17. Customer Specific Requirements - Supplement-K & IMDS - K表和国际材料数据系统
Supp.K is used to demonstrate the linkage between the Drawing - FMEAs - Control Plans - Operator Instruction Sheets. K表用来验证不同文件(图纸,DFMEA,PFMEA,控制计划和操作指导书)之间的联接性 All material need to comply to requirement of WSS-M99P9999-A1. 通过国际材料数据系统报告零件材料成分。

43 VPP Usage VPP的使用

44 What is VPP? 什么是VPP? VPP = Vehicle Parts Progress (整车零部件进展) Online data management & tracking system for Phased PPAP. 对阶段性生产件批准的在线数据管理和追踪系统。 Allows STA and Program team to track part Phased PPAP status. STA和项目组可以及时的跟踪阶段性生产件批准的状态。 Reports Approval or Rejection of PPAP Submission warrants. 在线批准或拒绝PSW. Generate reports by part, supplier, program. 可以根据零件,供应商和项目生成相应的报告

45 How supplier to load Phased PPAP Promised Dates into VPP? 供应商如何提交信息?

46

47 STA Approval thru VPP 在线批准
CMMSFOGA VPP PART DETAILS /26/04 07:31:45 ==> _________ __________________________________________________ PART/Descr: 3F B195-AG__________ CC: 34 SUPPLIER CODE/Name: S43XC ABC PLASTIC COMONENTS Challenge/By: -- Verification Promises -- -Quality Approval- -Slip Codes/Remarks- Run-at-Rate: Y 05/03/04 EF247EU A PG _________________ Quality: Y 05/21/04 EF247EU A PG /04 __________________ Production: P 06/25/04 EF247EU __________________ Capacity: P 09/14/04 EF247EU __________________ Demo Wkly Cap: OTG Exclude: _ ____ Purchse: __ _____________________________ NMP: __ _____________________________ Mfg Locations: 1) S43XC 3 L 2) _ Tool Src: _____ Tool IPD: N ________ Promise Reqd Dt: 02/11/18 Program: Plant: AP20A V/L: TA4 Part Class: NTJ MY: CPSC: Body/Trim: B Auth: P DDL: PPAP Level: 3 Func Appr: Sourced: 02/10/29 Desourced: Ntc/Release Dt: NC00E /10/24 Buyer: GC41 Name: C MULDER CDS: Phone: A PROGRM PLANT B-P IPD Over-ride Part SUP S Alert GYR Rej C F1=Help F2=AE0A/User Lookup F4=Prev Supplier F5=Next Supplier F6=FPGA/Supp Plan F9=FQGA/Challenge F10=Prev Part F11=Next Part F13=FRGA/Mfg F14=FNGA/Functioning NO MORE RECORDS AVAILABLE PG00156 Supplier Ready-for- Inspection Dates STA Approvals Supplier Promise Dates PPAP Level

48 Thank you! 谢谢您!


Download ppt "生产件批准程序 Production Part Approval Process (PPAP)"

Similar presentations


Ads by Google