Jeelink High Speed IO Solutions Jeelink高速I/O解决方案

Agenda 议程表 Why Jeelink 为何选择 Jeelink Where these products are used 高速IO产品的应用场所 Pluggable IO and ICM Products 可插拔IO和内含网络变压器网口 HS Copper Cable Assembly 高速数据电缆组件产品 Active Optical Cable Assembly 主动光缆组件产品 Jeelink Can Bring you More advantage Jeelink可以给您带来的更多优势 这是我们这个讲座的议程表，整个Presentation包括六个部分。即：为何要选择Jeelink，HSIO的应用场所，可插拔IO和内含变压器网口介绍，高速数据电缆组件产品，主动光缆产品，以及Jeelink可以给您带来的更多优势。

Why Jeelink 为何选择Jeelink

Total High Speed IO Solutions Why Jeelink Total High Speed IO Solutions 可插拔I/O (Input/Output)产品 内含网络变压器网口产品 Now if we back up and look at other applications in the same piece of equipment you’ll see that there are many more needs/applications for power connectors. Starting at the top, from power modules to compliment the latest backplane connectors, to bus bar connectors, to voltage regulator module connectors, Tyco Electronics manufactures the broadest range of power connectors in the industry. But, just having a lot of different connectors isn’t enough, since technologies change and end up forcing s the connector designs to change 高速数据电缆组件产品 主动光缆组件产品 Jeelink为您提供最为齐全的产品线

Jeelink一直积极的参入到这些行业标准中，并始终在新产品的开发中保持领导的地位。 Standards Drive the Market for HSIO connector Why Jeelink IEEE 标准驱动着hsio的发展。 Jeelink一直积极的参入到这些行业标准中，并始终在新产品的开发中保持领导的地位。

Jeelink Capabilities Mechanical design Mechanical FEA simulations Light transmission simulations Thermal Simulations/Consultant PCB design and analysis tools Test Fixture Designs Full SI testing and Simulation (CST and HFSS) EMI testing, including reverberation chamber (Nashua) Environmental/Mechanical Qualification Lab (Toronto) Project management Dedicated Automation Team

Where these products are used 高速IO的应用场所

Communications / Network Infrastructure Enterprise Switching Core Routing Optical Transport DSLAM BaseStation 通信以及网络设备

Data Center Infrastructure Servers Storage SAN Switching 数据中心设备

Pluggable IO and ICM Products 可插拔I/O和内含网络变压器网口产品

Pluggable IO and ICM Products Roadmap Signal Speed (Gbps) Released Development Concept Current Product Offering 10/100/ 1,000 RJ45 (Std, Mag, POE) 2009 2010 SDR 2.5 2011 2012 Ethernet Infiniband Fibre Channel SAS 10 Gig E 40 Gig E 100 Gig E Cat 6A (10GBase-T) DDR 5.0 QDR 10.0 2G, 4G 8G 16G MRJ21 (Std, Mag) HSSDC2 SFP SFP+ CFP – Long reach QSFP (4X) CX4 RJ point 5 CXP 12X Mini-SAS 12X POE+ XFP CXP 10X – Short reach 16GFC SFP Mini-SAS HD 3G, 6G Stacked Cat 6A (10GBase-T) 32G 4x10 10G Trunk 12G EDR 25 32GFC I/O 4x25G I/O 这是我们高速可插拔接口以及内含变压器接口的路标图。大家可以看到对应于右边的四种主要的高速数据传输标准，我们Jeelink都有对应的产品提供，比如说我们可以为符合Ethernet标准的设备提供从1G到100G的接口，从SFP/RJ45 with Mag/MRJ21到SFP+/QSFP以及CFP等。同时呢我们Jeelink还不断的推出符合新标准或者应用趋势的新连接器，比如我们在2009年推出了RJ point 5，Cat6A接口，以及100G的接口。在今年呢我们呢计划推出堆叠的Cat6A接口，16GFC，CXP10X，CXP12X以及MiniSAS HD等产品。在随后的两年里我们计划提前推出符合将来市场需求的单通道25G以及单通道32G新产品。

Components of a pluggable interface Lightpipe Heatsink and clip Cage PT Connector Direct attach copper cable 首先给大家介绍一下我们的高速可插拔产品。这是一个高速可插拔接口的组件介绍，包括板端连接器…等。Jeelink不但可以提供板端产品的Total solution，另外还提供主动/被动铜缆组件，以及主动和被动光缆组件。 Active optical cable Optical transceiver module Optical cable

Typical Pluggable IO Cage Port configurations Single port cages Ganged cages 这是典型的可插拔接口包括以下几种方式：单口，单排，腹靠腹以及堆叠方式。 Belly-to Belly cage mounting Stacked cages

Wire Harness (SFP) Wire Harness Waterproof Cable assembly Metal frame Injection overmold SFP产品可以Support到4Gb/s，泰科电子可以全面的产品系列，包括单口，单排以及双排产品。其中双排的屏蔽笼集成连接器，可以采用压接方式将屏蔽笼和连接器一次组装完成。 SFP采用20Pin的PT连接器 另外我们可以为短距离提供低成本铜缆。

Small Form-factor Pluggable (SFP) Supports applications up to 4 Gb/s Cages available in single port, ganged, and stacked configurations Stacked cages have integrated connectors, press-fit in one process step Uses 20 position PT (Pluggable Transceiver) connector Direct attach copper cable assemblies for lower cost with short reach SFP产品可以Support到4Gb/s，泰科电子可以全面的产品系列，包括单口，单排以及双排产品。其中双排的屏蔽笼集成连接器，可以采用压接方式将屏蔽笼和连接器一次组装完成。 SFP采用20Pin的PT连接器 另外我们可以为短距离提供低成本铜缆。

SFP Product Family Single Port Product Ganged Product Stacked Product Two-piece (reflow solder) Single piece (solder, press fit) Light Pipes available Ganged Product 1x2, 1x4, 1x6 configurations Light Pipes Available Requires surface mount 20-pos connector Stacked Product 2x1, 2x4, 2x6 configurations Standard and Low Profile options Light Pipe versions available on low profile versions Incorporates press-fit stacked connector 随着市场对更多功能以及更多应用方式的需求，我们推出了导光柱选项，以及单排集成连接器和超低型的堆叠产品，从而使我们的整个SFP产品线非常丰富。

XFP Supports applications up to 10 Gb/s Single port cages and direct attach copper cables available EMI containment through gasketing in cages and at bezel Uses patented riding heatsink technology for thermal dissipation Uses 30 position PT (Pluggable Transceiver) Connector XFP是为10Gb/s的串行数据速率需求而设计的。 我们可以提供市场需要的单口屏蔽笼以及铜缆组件产品。 EMI抑制采用在屏蔽笼和面板之间加导电橡胶圈来实现。 XFP是第一个用Jeelink的骑式散热技术来实现散热管理的。 XFP采用30pin的PT连接器

SFP+ Supports applications up to 10Gb/s, backward compatible with SFP Cages offered in single port, ganged, and stacked configurations Elastomeric gaskets and springs for EMI containment Uses enhanced 20 position PT connector Direct attach copper cable assemblies offered 伴随着协议速率提高需求，我们推出了向后兼容SFP的10G的SFP+产品，可以应用于8G的Fiber Channel以及10G的Ethernet产品。我们提供单口，单排以及堆叠的屏蔽笼选项，同时提供采用弹片和导电橡胶垫两种屏蔽措施的产品。 PT连接器还是采用20pin的连接器，但通过内部结构的修改改善了电气性能。 另外我们也提供低成本解决方案的铜缆组件。 led to the development of the SFP+ in Jeelink rface, which ex Jeelinknds the SFP form factor to support applications to 10 Gb/s, such as 8G Fibre Channel and 10G Ethernet. Cages are offered in the same port configurations as SFP, with elastomeric gaskets and enhanced EMI springs to address EMI containment at the higher data raJeelinks. The connector is also optimized for the higher speeds, but with the same mating inJeelinkrface and host board footprint as SFP. An SFP plug will maJeelink with an SFP+ cage and connector. Copper cable assemblies are also available.

SFP+ cages for PCI applications One-degree mount on the board raises bezel opening (SFF-8075) Press-fit and solder versions available Heatsink option Used in pluggable adaptor cards (e.g., host bus adaptors) Jeelink另外推出了针对PCI应用的一个产品系列，这类产品安装到PCB时，与PCB成1度角。我们可以提供压接以及焊接的版本，另外还用Heatsink可以采用。

EMI springs vs. Elastomeric gasket A customer choice Lower cost Less force applied to bezel Elastomeric Gaskets Tighter tolerances between board edge and bezel are required Shielding slightly better in single row cage designs Less susceptible to damage in handling 我们前面提到我们的SFP+产品根据屏蔽材料的不同分两类，这里给大家介绍一下它们的区别： EMI弹片，成本相对导电橡胶垫底，并且对面板的正面作用力非常小，应为它是通过面板的。 EMI导电橡胶垫呢，对板边缘到面板的公差要求比较高，应为过松或者过紧都会影响EMI效果。屏蔽效果比弹片方式略微好一点。另外呢在运输组装的过程中也不容易被损坏。

SFP+ Enhanced Footprint Improves EMI containment in empty port condition (when no module is mated). More contact points between bottom and top cage Added press-fit pins around cage Springs on bottom cage plate contact ground pad in front of connector 根据某些客户对EMI性能要求高的需求，我们推出了加强型的屏蔽笼。在笼周边的pin增多了，也增多了上下两部分结合部位的触点个数，同时在底边加了一些弹簧片。从右图我们可以看出连接器被屏蔽笼四面包围，所以EMI性能大大提高。

QSFP (Quad Small Form-factor Pluggable) 4 channels in a single QSFP port Each channel supports applications up to 10Gb/s for a total of 40 Gb/s per link Offers 3X the density of SFP, 4X density of XFP Port opening is size of XFP Follows SFF standard INF-8438 Adopted by Infiniband for dual data rate (DDR) Use 38pin Everclear connector Cages offered in single port&ganged type Heatsinks and lightpipes available Direct attach copper and PARALIGHT optical cable assemblies offered 下面介绍我们伴随着客户对接口高密度需求而推出的QSFP，QSFP也就是Quad SFP，或者说四通道的小型可插拔接口. 每一个通道可以最高走10G的信号，所以totally是40G的信号传输能力。它是SFP+的三倍的密度，是XFP的四倍的密度。采用38Pin的连接器，有散热片和导光柱可以选择。另外Jeelink还可以为QSFP接口提供铜缆以及有源光缆。

Two styles of EMI containment Key Cage Assemblies will accept Jeelink Heat Sink Clip Thru Bezel, 1888617-1 Port Spacing: 21.0mm Design consistent with SFP Cages Behind Bezel: 1888781-1 Port Spacing: 23.5mm Design consistent with XFP Cages (gasket to be applied) Cage does not extend through bezel, for stub-free module insertion 我们的单口QSFP用穿过面板以及在面板后两种产品可供选择，穿过面板采用了类似SFP+的技术，面板后产品采用了类似XFP的Jeelink成熟技术。

Advantage of Behind-Bezel with Plug Insertion Thru Bezel top of module stubs Thru Bezel pc board stubs 从这几个图片我们可以看出，面板后的QSFP具有盲插和美观的优点。同时面板后的QSFP还兼容PCI的需求。 PCI Compatible Behind Bezel stub free

CFP - 10X Long reach Ethernet solution Supports 40G and 100G Ethernet CFP optical transceivers Capable of side by side mounting as well as “belly to belly” mounting Provides full EMI shielding Uses a universal rail for both left and right positions Allows integration of host PCB to host bezel (face plated) by either of two methods for manufacturing flexibility. 随着社会生产生活对数据速率进一步提高的要求，我们推出了CFP 10通道100G的产品。 他可以support 40G 以及100G 的应用需求，符合腹靠腹安装要求，提供超强的EMI屏蔽性能。在这里想跟大家提一下的是，我们的导轨采用了灵活的对称设计，从而满足了一个料号用于两边并满足了腹靠腹的要求。另为在面板内外屏蔽的设计上，也提供了两种组装方式，方便客户的组装。

Full Assembly With Riding Heat Sink Heat Sink P/N 1963856-1 (includes mounting hardware) EMI spring fingers on transceiver 在100G的应用中需要用到散热器，但 CFP在40G的应用中不需要额外的提供散热片，因为光电转换模块已经在相同的空间内集成了一个散热片。在这里我们散热片采用弹簧螺丝固定，从而保证散热器和光电转换模块紧密接触，保证散热效果。 Optical Transceiver Being Inserted Optical Transceiver Fully Seated Retention screws engage the receptacle Cover threaded inserts 100G Transceivers require riding heat sink, 40G does not

16G SFP+ Next generation SFP-based designs support 16G Fibre Channel, offer performance improvement at 8-10G Backward compatible with SFP, SFP+ 20 pos SMT connector Low loss contact design (based on CFP) Alternate host board layout can further increase performance Stacked connector Enhanced internal construction for lower losses All Jeelink stacked SFP+ products will be upgraded to extend performance to 16G Copper cable assys and Madison copper cable under development Mass production in mid of 2010 PN 2110759-1 Mass production in Jul 2010 根据Fiber Channel标准的发展，我们在今年将要推出16G的SFP+产品，接口向后兼容SFP和SFP+产品。在20Pin的连接器中我们采用了CFP连接器的技术，从而提高了产品性能，此连接器将于年中量产。通过对堆叠式连接器的内部结构的修改，我们将于今年的7月份将所有的10G SFP+产品升级到16Gbps. 我们相应的支持16G的电缆组件也正在开发中。

CXP 12X design is standard for InfiniBand 10X design is standard for Ethernet (100G short reach) Jeelink intends to offer: Host board connector/cage assemblies Copper cable assemblies & Active optical cable assemblies EMI plugs 对应于客户对接口密度越来越高的要求，我们在年内将会推出符合12X Infiniband标准和10X Ethernet标准的CXP产品。 我们将提供板端的连接器和屏蔽笼，铜缆组件和有源光缆组件，以及EMI插塞。

Mini-SAS – Internal Applications Internal cable assembly Shell provides latch retention Combination shell and SMT connector for one-step processing 另外我们公司还提供内部的以及外部的MiniSAS连接器以及cable assembly。内置连接器我们有Verticle，right angled等各种产品。 36 position SMT connector in vertical and R/A configurations

Mini-SAS – External Applications Diecast shields w/ bezel gaskets Shielded cable assembly Push/Pull release tab being tooled 我们的内部以及外部MiniSAS连接器及Cable Assembly都是在顺德工厂生产，所以性能以及性价比都非常好。 26 position R/A SMT connector

ICM (Integrated Connector Modules) with PoE function Classify from power sourcing 1. Normal PoE (350mA current) 2. PoE Plus (Over 350mA current) - PoE+ 600mA max current capability - PoE+ 700mA max current capability - PoE + 750mA max current capability PoE + 840mA max current capability Classify from with or without external control: 1. Enabled PoE 2. Integrated PoE power (Integrated power and CPLD controllers) 前面介绍了可插拔告诉连接器产品，下面介绍带变压器并支持PoE功能的网络接口产品。根据功率来分我们可以提供350mA的常用产品，也提供600mA，700mA，750mA以及840mA的PoE产品。根据PoE控制模式可以分为，只支持PoE功能和内置PoE功能模块的产品。

MRJ21 Product Information - Overview MRJ 21 was developed to address next generation density and performance requirements for the RJ45 interface. Each MRJ 21 can be configured for 6 ports of GbE, or 12 ports of 10/100. 3 MRJ 21’s fit in the footprint of a 2x6 Stacked RJ45 Crosstalk: Cat 5E compliant Jackscrews for positive latching Keyed for cable orientation Fully shielded system to control EMI. Durability- 500 cycles 接下来给大家介绍的是下一代高密度网络接口产品MRJ21，每个MRJ21可以作为6个GbE接口，也可以作为12个10/100M接口。 3个RJ21可以放到2x6的堆叠RJ45产品的footprint, 所以是GbE RJ45的1.5倍密度，10/100M接口的3倍密度。 采用螺丝固定，提高接口机械性能。 MRJ 21 Connector

RJ Point Five Product Information - Overview RJ Point Five is a new communication interface. RJ Point Five interface is to double the density of an existing RJ45 platform for Cat 5 applications and will cover non-PoE, PoE & non-PoE magnetic packages. Currently the pitch for RJ45 is 13.97mm, while for RJ Point Five , this spacing will be shrunk to 7mm. RJ Point Five Receptacle Center Distance 7.00 根据客户对接口密度的进一步要求，我们于去年推出了RJ POINT 5 产品。它是一种新型的通讯接口，是RJ45的两倍的密度。 我们可以提供Non-PoE，PoE以及Non-PoE With Magnetic。 RJ45 Receptacle Center Distance 13.97

Density - RJ Point Five VS RJ45 Double the density of an existing RJ45 platform RJ Point Five Traditional RJ45

RJ Point Five Product Family RJ Point Five Receptacle 2x1, 2x6, 2X8, 2x12, 2x16 Ganged 1xN in tooling process now 我们可以提供2x1, 2x6, 2x8, 2x12, 2x16产品，同时为了满足客户对超低高度产品的需求，我们正在Tooling单排的RJ Point 5。

RJ Point Five Plug HP-5 HP-6 Pair C HP-7 Pair D HP-8 HP-1 HP-2 Pair A Pair B 这是它的Plug端的线缆以及它的管脚排布。

High Speed Copper Cable Assembly 高速数据铜缆组件产品 我们Jeelink除了提供高速的可插拔连接器和带变压器的网络接口产品，我们还提供高速数据铜缆产品。

Jeelink Products XFP SFP / SFP+ Mini SAS QSFP Features: - Supports applications up to 10 Gb/s Single port cages and direct attach copper cables available - EMI containment through gasket in cages and at bezel Timeline: Mass Production SFP / SFP+ Features: SFP: Supports applications up to 4 Gb/s Direct attach copper cable assemblies for lower cost with short reach fits AMC/uTCA compact modules SFP+: Supports applications up to 10Gb/s, backward compatible with SFP Direct attach copper cable assemblies offered Timeline: Mass Production. Mini SAS Features: - Interconnect system for both internal and external applications (shielded and unshielded versions) - Supports 6Gb/s+ - Standardized by the Small Form Factor (SFF) Committee for Mini-SAS 4X solution Timeline: Mass Production. QSFP Features: - 4 channels in a single QSFP port. - Each channel supports applications up to 10Gb/s for a total of 40 Gb/s per link - Offers 3X the density of SFP, 4X density of XFP. - Port opening is size of XFP Timeline: Mass Production. CCAO的意思是“线缆和线缆组件部门”。这是我们的高速铜缆产品，包括支持4G/10G的SFP/SFP+铜缆组件，支持10G的XFP铜缆组件，支持40G的QSFP铜缆组件，以及单通道支持6G的MiniSAS铜缆组件。

Jeelink Products CX4 MRJ 21 CXP SAS HD Features: - Designed For Infiniband, 10G Ethernet (CX4) and SAS. -Tyco offers PCB interface instead of traditional connector interface. 8 differential pairs. Improved Performance - Signal integrity, Shielding, Strain Relief, Latching Compatible with Competitive Products Timeline: Mass Production. MRJ 21 Features: - Very high density - Designed, tested and verified to transmit Gigabit Ethernet up to 100 meters - Applications include network closets, Gigabit Ethernet switches, anywhere mod plugs are used today Timeline: Mass Production. CXP Features: - 12X design is standard for InfiniBand - 10X design is standard for Ethernet (100G short reach) - Next Generation Router Timeline: Prototype Available at mid of 2010. . SAS HD Features: - Dual row interface capable of 12Gb/s per channel. - Scalable design to support from 4X to 16X. Timeline: Prototype Available at mid of 2010. . 另外我们还有支持10G的CX4铜缆组件和支持MRJ21接口的铜缆组件。同时我们线缆组件部门现在正研发与CXP和SAS HD接口匹配的铜缆组件。

Madison Cable TurboTwinTM Advantages 30, 28, 26, 24, 22 AWG New - 32 AWG 1 to 36 Pair+, 1x, 2x, 4x, 8x, 12x 85 - 150 Ohm Impedance Round, Flat, Breakout, Composite Cables Side Drain Industry Leading Quality/Consistency Compliant with Many Industry Standards InfiniBand, SAS, FC, PCIe, CX4, CR4, CR10 Bandwidths 6G, 8G, 10G and 15G with 25 GHz in development >12 Years Experience for High-Speed Pairs Custom Designs tailored to assembly process 为什么我们说Jeelink具有作高速电缆组件的Advantage呢，这是应为我们有Jeelink所有的Madison品牌高速电缆。 Madison cable 具有不同线径，不同差分对，不同差分阻抗，以及不同速率的选择。 同时具有多于12年的高速差分线缆经验。

Active Optical Cable Assembly 主动光缆组件产品 最后为大家介绍的是我们的主动光缆组件产品。

PARALIGHT Active Optical Cable Assemblies Advantages No Equipment Upgrades Functions like Standard Electrical Cable 200 Meters Plus Reach Low Latency No EMI No Cleaning No Eye Safety Issues (if used properly) Hot Pluggable Optical Cable Advantages 1/3 Size of Typical Copper Cable Fiber cable requires 1/7 the space in size 1/10 Weight of Copper Cable Flexible in All Directions Ease of Cable Management Increased Air Flow Standards •INFINIBAND SDR, DDR •10Gb Ethernet 主动光缆有哪些优点呢？它可以象用普通的铜缆一样，不需要设备接口升级。，它具有长距离，低延迟，不需要清洗，没有光伤眼睛的危险。另外它还具有光缆的一般优势，线径细/体积小/重量轻/易于管理/提升空气流动等。 Tyco Electronics Light Bending IP

PARALIGHT Key technologies Molded Optics Interconnect For Multi Fiber Package MULTI FIBER MOLDED OPTICS Jeelink Light Bending IP Fewer Parts Higher Reliability Lower Cost 这是介绍了我们Light Bending技术，它有器件少/高可靠性/低成本等优点。 OPTICAL ENGINE EMITTER OR RECEIVER

PARALIGHT Active Optical Cable Assemblies Timeline Cx4 & QSFP 4x5 Gb/s DDR 4x5 20 Gb/s QSFP 4x10 Gb/s QDR 4x10 40 Gb/s New QSFP 4x10 Gb/s QDR 4x10 40 Gb/s CXP 12x10 Gb/s QDR 12x10 120 Gb/s QTR3, CY2010 SFP+ 1x10 Gb/s 10 Gb/s Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 2009 2010 2011 这是我们主动光纤的路标图，我们在2009年推出了QSFP到CX4以及QSFP到QSFP产品。而今年我们将要推出低功耗的QSFP，CXP和SFP+主动光纤产品。 另外，我们正在准备12x12.5Gb/s以及SAS Stds 的主动光缆。 Development Qualification Introduction Under Consideration: 12x12.5 Gb/s & SAS Stds.

Jeelink can bring customers more advantage Jeelink可以给客户带来的优势

Jeelink综合的优势快速实现您的创意 Benefits to Customers Strong and quickly local support Local technical resource support Product Engineer, Development Engineer & Circuit, Design Engineer & Product Manager. Local R&D hardware resource support testing lab (mechanical, environment, electronical, signal integrity etc) Strategy tooling center (can support prototype samples making) Local manufacturing support 我们可以提供强大且快速的本地支持。这包含技术支持，测试以及快速样品制作支持和本地的工厂支持。 Jeelink综合的优势快速实现您的创意

Jeelink Website www.Jeelink.cn More information Benefits to Customers

Thank You！ 谢谢！ OK， that’s all. 谢谢大家。