XILINX FPGA Download Programming

Presentation on theme: "XILINX FPGA Download Programming"— Presentation transcript:

1 XILINX FPGA Download Programming

2 XILINX FPGA Download Tools 1. Download cable. 2. XILINX ISE 9.2.03i

3 Hardware Setup 1. 接上Download cable. 2. Power ON. TMS 接到實驗板PIN1.

4 Download programming 1. 選擇Xilinx ISE 燒錄工具 iMPACT.

5 Download programming 2. 選擇”create new project(.ipf)” 後,按”OK”. 選擇此項.

6 Download programming 3. 按”Finish”.

7 Download programming 4. 選擇第一個元件後,按滑鼠右鍵,
選擇”Assign New Configuration File”. 1.選擇此元件後按滑鼠右鍵. 2.選擇此選項.

8 Download programming 5. 選擇副檔名為.mcs燒錄檔後,按”Open”. 註解:
.mcs 燒錄至PROM,燒錄時間較久,但電源關閉後程式依然存在,適合已開發完成的程式. .bit 燒錄時間較快,檔案燒錄後只會暫存,電源關閉後程式會消失,適合開發中的程式測試使用.

9 Download programming 6. 按”Bypass”. 1. 燒錄工具會自動跳至第二個元件. 2. 選擇”Bypass”

10 Download programming 7.選擇第一個元件後,按滑鼠右鍵, 選擇”Program”. 1.選擇此元件後按滑鼠右鍵.
2.選擇此選項.

11 Download programming 7. 依照圖示選擇後,按”OK” 選擇 ”Erass Before Programming”,
“Load FPGA” “Parallel Mode” 2. 按“OK”

12 Download programming 8. 開始燒錄. 1. 開始燒錄. 2. 當出現此圖示代表燒錄成功.

13 Programming OK 將Power OFF後,重新Power NO. 1.將Power OFF後,重新Power NO.
2.程式燒錄成功此LED會亮起.

14 Thank You!!!