Whiskey Barrel Wall Mount

Presentation on theme: "Whiskey Barrel Wall Mount"— Presentation transcript:

1 Whiskey Barrel Wall Mount
Open Issues 威士忌桶壁挂式 开放的问题

2 Open Issues 未决问题

3 2015-12-23, TBG: Holes added per ZH request
, TBG: Holes added per ZH request. Please provide the 3-D of the EPDM ‘pad’.

4 2015-12-21，ZYH: 3D has been changed. New positive stop is added. Ok.
Counter-proposal positive stop. 处理止停 ZH These two parts in triangular shape are a separate parts and be welded here. Not coming from same blanking material 这个三角片客户的3D上是与固定铁座一体的，而实际生产是分开的 , TBG: I have modeled these separate parts, but, as these are measured off of production samples, their dimensions may not match what ZH has on record. 我们已经更改为分开的部件，但是， 这个是从生产样品中测量出来的， 他们的尺寸可能和众恒记录的是不匹配的。 ，ZYH: 3D has been changed. New positive stop is added. Ok. , AMES: ZH will present a counter-proposal on Wednesday morning or use the current design, due to time constraints. ZH 将提出在周三上午一个反建议，或者使用目前的设计，由于时间的限制。 ，ZYH: There is interference

5 这个新的威士忌桶是比老的轴转动重2.67pounds，会施加额外的张力在框架和转动铰链上。
, TBG: The new Whiskey Barrel basket weighs 2.67 pounds more than the Floral Wall Mount. This puts additional strain on the frame and swivel hinge. 这个新的威士忌桶是比老的轴转动重2.67pounds，会施加额外的张力在框架和转动铰链上。 As you create a design for the positive stop feature, consider the addition of a ‘rest’ that will support the weight of the assembly, hose, and water while the hose reel is ‘closed’. 因为你们制作了一个止停结构， 考虑到额外的”坐落“， 这个会在绕管器关闭的时候来支撑这个穿配好产品， 管子和水的重量。 We are seeing exaggerated sagging and potential issues with the swivel hinge in our test samples. 我们在我们的测试样品上看见了转动铰链过大的下垂和潜在的问题。 只是20次转动绕管器开关， 这个金属缝隙就出现了 , AMES: ZH will investigate samples and check how to improve. The ‘rest’ will NOT be included at this time. ZH 将样查，并确定如何改善。在支撑将不包括在这个时候。

6 , TBG: The cast interface inside the hinge must be greased to eliminate the galling, scraping, and aluminum wear issues.

7 2015-12-23, TBG: The knob post was revised from 0. 105” to 0
, TBG: The knob post was revised from 0.105” to 0.125” to match the Floral Swivel Wall Mount and to eliminate the knob turning and screw backing out issues.

8 VS Eric Hyp There are many differences between the swivel wall-mount product and 3D. I recommend that both ZH and Ames conduct independent reviews, putting together a list of changes that need to be made. 老轴转动的3D和实际的产品有很多的不同、 我建议众恒和AMES都分别的看看，并一起列出一个需要更改的清单 , AMES: AMES is working to verify the changes on the Floral and will provide an up dated design in January. AMES是验证花卉旋转壁挂式安装的化，并提供最新的设计，在一月份。

9 这个V型部件可能会有干涉， 并会推动这个胫骨和面板，参见下一页
胡志勇 缝隙太大，木纹板松动 建议：更改V字固定架的高度（7.62改到5.62） 筋的位置增加缺口 胡志勇 缝隙太大，木纹板松动 建议：更改V字固定架的高度 : We will revise from 7.62mm to 5.33mm, a reduction of 0.090” as measured in our lab. This will allow the boomerang to engage the ribs as well as the end of the pre0finished panel and greatly reduce the “gap” between the panel and the flange. 我们从7.62mm更改到了5.33mm,　按着我们实验室测量的减少0.090” 。　这个会使得Ｖ型部件可以和胫骨还有喷涂板末端咬合，　同时可以大大减少板子和轮盘之间的间隙　 , TBG: The boomerang is intended to interfere and push on the ‘grooves’ and the panel. See the next slide… 这个V型部件可能会有干涉， 并会推动这个胫骨和面板，参见下一页 Eric Hyp Not yet updated properly. See next page. 这个还没有更新。 参见下一页 , AMES: AMES has revised the interference. Please review. AMES修订的干扰。 请查看。 : Leave the boomerang as-is, do not add gaps. We feel that the cutouts will reduce the strength of the boomerang too much. Want to keep the strength. 让Ｖ型部件保持这样就好，不要更改，　不要增加开口。　我们感觉这个开口会减少这个ｖ型部件的强度，　希望保持这个强度

10 2015-12-21,ZYH:interferce with frame 1.27mm
, AMES: AMES has revised the interference. Please review. AMES修订的干扰。 请查看。 ,ZYH:interferce with frame 1.27mm ,ZYH:interfernce with rid , ZYH: updated drawing from AMES , AMES: Yes, this interference is intended. If you put together a sample with these dimensions, you will see the advantages. 是的，我们的意思是存在这种干扰。如果使用这些维度构建一个示例，你会看到的优点。 ,ZYH: boomerang interference with the panel

11 ZH会使毂盖质地相同的现有花卉旋转墙壁安装产物。 不要改变角度草案。
，ZHY: The height of that portion is increase, so no interference with screws ，ZHY: only 1°draft angle on this surface in the latest 3D ，ZHY:only 1.5° draft angle on this surface in the latest 3D ，ZHY: only 1.5° draft angle on this surface in the latest 3D , AMES: ZH will change to other texture on the hub cover. No change on the draft angle. Make the texture like the current Floral Swivel wall mount design. ZH会使毂盖质地相同的现有花卉旋转墙壁安装产物。 不要改变角度草案。 ，ZHY: only 1°draft angle on this surface in the latest 3D ，ZHY: only 1°draft angle on this surface in the latest 3D

12 2015-12-21，ZHY: add draft angle 4°, OK.
胡志勇 1.马车螺钉太长起不到固定作用 建议：缩短马车螺钉 减少了铝盘上的铆钉螺丝孔 到6.5mm x 6.5mm : OK. We will update the design for standard M6 carriage bolts. 好的，　我们将更新设计到标准的Ｍ６马丁螺丝 ，ZHY: add draft angle 4°, OK. , AMES: OK, verify. OK，审核修改后的模型。 Eric Hyp Not yet updated. 还没有更新 胡志勇 2.轮圈与木纹板方孔太大，马车螺钉会打滑 建议：轮圈与木纹板上的方孔改小 Eric Hyp Not yet updated. 还没有更新 , TBG: Completed. 完成了 减少了铝盘上的铆钉螺丝孔 到6.5mm x 6.5mm

13 ZH提供的五金部件3D模型都已经放到位置上。
杜伟勋 Mr. Du 马车螺钉的高度和宽度都不对 Carriage bolt dimensions need to be updated to match standard components. 杜伟勋 马车螺钉的高度和宽度都不对 , AMES: OK, verify. OK，审核修改后的模型。 , TBG: The hardware 3-D models supplied by ZH were all put into place. ZH提供的五金部件3D模型都已经放到位置上。 ，ZYH：The actual width of the carriage bolt is mm，the 3D which we sent to AMES is with width in 6.3mm , AMES: The current model contains Square neck bolt with ball head M6 shorter.sldprt. ZH will provide the correct hardware. 目前的模型包含 Square neck bolt with ball head M6 shorter.sldprt。ZH 提供正确的硬件。

14 Need Customer Input 要客人确定

15 Closed Closed Date: , AMES: ZH will present a counter-proposal on Wednesday morning or use the current design, due to time constraints. ZH 将提出在周三上午一个反建议，或者使用目前的设计，由于时间的限制。 , TBG: Make this 50mm to assure that the frame arm stops before impact with the water system inlet? 制作这个是50毫米来确保这个框架臂在冲击到水系统之前止停

16 建议：改变固定铁座形状， 并增加一个塑料套变成这样
, TBG: See the AMES recommended positive stop. All erroneous features are deleted from the models. 参见AMES建议的止停设计。 所有的不正确的特点从模型上删除。 Closed Closed Date: 胡志勇 长管会撞到进水嘴 建议：改变固定铁座形状， 并增加一个塑料套变成这样 : Yes! Please incorporate this in both the Whiskey Barrel and Floral Swivel Wall mount designs. Eliminate the “pad”. Please advise what material is the “bumper” cover? 是的，　请把使用在威士忌桶和老轴转动上的固定架设计合并起来。　去掉“垫”。　请告知这个冲击盖是使用什么材料的？ ZH:这个冲击盖我们准备用普通PP制作 在转动臂上增加了止停设计 这样就可以消除这个零件 Eric Hyp Not yet updated. Current 3D structure is different than anticipated. 还没有更新， 现在的3D 结果和预先的不同 Eric Hyp Not yet updated. Current 3D structure is different than anticipated. , AMES: ZH will present a counter-proposal on Wednesday morning or use the current design, due to time constraints. ZH 将提出在周三上午一个反建议，或者使用目前的设计，由于时间的限制。 ，ZHY: new positive stop is added. OK

17 , TBG: Change the water system pivot latch from glass-filled nylon to non-filled nylon. The glass-filled is too brittle and stiff. This part must be able to flex and bend, but be tough enough to not fracture. 更改水系统枢轴扣的材料，从玻纤尼龙更改为没有添加的尼龙。 这个玻纤添加太催，太硬了。 这个部件一定要可以弯曲， 但是要足够强硬，不能破损 , AMES: ZH will change to non-filled nylon. Closed Closed Date:

18 这个固定挂座转动臂在运输中一定要不移动。 这个框架臂一定要固定到装配好产品上， 紧紧贴着新的止停部件
Closed Closed Date: , AMES: ZH has secured the arms together during recent testing and make this standard on the Whiskey Barrel and the Floral moving forward. , TBG: The wall-mount swivel frame arm must not be permitted to move during shipping. The frame arm must be secured to the main assembly, tightly against the new positive stop. 这个固定挂座转动臂在运输中一定要不移动。 这个框架臂一定要固定到装配好产品上， 紧紧贴着新的止停部件

19 , TBG: When forces act against the wall-mount swivel frame arm, it pushes against the water system inlet fitting. This causes a rotational moment through the inlet, to the shroud and lacth and is only stopped by the strength of the water system outlet and axel tube. Unfortunately, there is sufficient clearance allowing travel that the shroud and latch both fail before the movement is stopped. 当力向着壁挂转动臂施加的时候，它向着水系统进水接头推动。 这个会导致转动可以到水系统，到轴套和锁扣，时只能被水系统出水和轴管止停。 不幸的是，这里有足够的间隙可以移动，在移动被止停之前，使得轴套和锁扣2个都失效。 , AMES: No additional changes will be included that would confine the shroud and water system. Closed Closed Date: , TBG: Under no circumstance should the frame come into contact with the water system except where it is anchored as designed. The positive stop must be amply capable of stopping all contact with the water system throught the life of the product. Additionally, a sleeve should be added to the inside of the tube-axel to consume some of the clearance between the shroud, inlet, and outlet if possible. 在任何的情况下框架都不能和水系统接触，除了设计的固定位置。 在产品的寿命周期中，这个止停一定要充分的阻止所有和水系统的接触。另外， 在管轴内部增加一个衬套尽可能的来去掉轴套，进水和出水之间的间隙。 , AMES: ZH and AMES agree that the water system inlet must be protected..

20 没有必要探讨后在这个时候。这种水系统由ZH安装插销必须在正确的安装和工作在包装前秩序。不应该有任何理由，如果正确安装和保护闩锁将打破或打开。
Closed Closed Date: ，ZYH:进水锁松动有两个问题：1.座与进水锁的间隙大。2.此问题是主要问题， ，ZYH:进水锁松动有两个问题：1.座与进水锁的间隙大。2.此问题是主要问题，轴转动此零件没有这个小圆柱。Water lock loose There are two problems: 1 large seat and the water lock gap. 2. This issue is a major problem, not part of the axis of rotation of this small cylinder. ，ZYH:进水锁松动有两个问题：1.座与进水锁的间隙大。2.此问题是主要问题， ，ZYH:进水锁松动有两个问题：1.座与进水锁的间隙大。2.此问题是主要问题，轴转动盖 , AMES: No need to explore the post at this time. This water system is installed by ZH and the latch must be in proper fitting and working order prior to packaging. There should be no reason that the latch would break or open if installed and protected properly. 没有必要探讨后在这个时候。这种水系统由ZH安装插销必须在正确的安装和工作在包装前秩序。不应该有任何理由，如果正确安装和保护闩锁将打破或打开。 ，ZYH: For the slatted deck box, there is post at that location, so the latch is moving along the post, so the fitting is tighter. ，ZYH: For the slatted deck box, the surface of these two parts are same level. ，ZYH:板条桌板结构，左座上有这个小圆柱，进水锁沿着这个小圆柱转动,紧密配合，自己不会松落。

21 2015-12-14, TBG: Completed – removed and corrected size.
ZH: 1.客户的3D上装了两个轴套，实际上只有一个 2.实物上的这个高度尺寸是12.2mm There are two Swivel shrouds shown in the 3D, but only one be needed. The actual height of that Swivel shroud is 12.2mm, Would you please updated your 3D. Closed Closed Date: 胡志勇 客户的3D上装了两个轴套 , TBG: Completed – removed and corrected size. 不完整已经去掉了， 并更改了尺寸 ，ZYH: OK

22 Closed 2015-12-21，ZYH: OK Closed Date: 2015-12-21
ZH 下面这个是我们根据实物更新后的3D，ECN有更改过了 We have updated the 3D according to the actual ejected part. it even be changed by ECN , TBG: Completed. Model RD-HSE-05681a. 完成了， 模型是RD-HSE-05681a. ，ZYH: OK

23 完成了，证实了之前的去掉， 并去掉了额外的结构。
Closed Closed Date: ZH The Bracket Plate used in the Floral hose reel is like what shown in the picture. Would you please updated your 3D. 实物是这样子的 , TBG: Completed – verified previously removed, and removed ‘extra’ configuration. 完成了，证实了之前的去掉， 并去掉了额外的结构。 ，ZYH: OK

24 ZH 长管实物尺寸：146mm The actual dimension here is 146mm ZH 长管实物尺寸：75mm The actual dimension here is 75mm ,ZYH:We have measured two samples, one of them is149.03，and another one is , Closed Closed Date: , TBG: Rob S. and I both have measured this at [5.915”] and [5.969”] on actual production product. We feel best to have this dimension modeled at 150mm rather than 146mm. 我们2个都测量实际生产产品的这个尺寸分别是 [5.915”] 和 [5.969”] ， 我们觉得最好的尺寸应该是150mm 而不是146mm 150.00mm 146.00mm interference with water system. 146mm和水系统是有干涉的。 Counter-proposal positive stop. 处理止停 , AMES: We will keep the dimension at 150mm at this time. 我们将继续在150毫米尺寸在这个时候。 ，ZYH: ok

25 2015-12-14, TBG: Our measurements of actual samples: 115. 87 [4
, TBG: Our measurements of actual samples: [4.562”], [4.500”] and [8.584”], [8.786”]. Changes to the values requested by ZH. 我们测量的实际样品是: [4.562”], [4.500”] 和 [8.584”], [8.786”].更改到众恒要求的数值 Closed Closed Date: ZH The actual dimension here is 115mm 实物尺寸：115mm ZH The actual dimension here is 223mm 实物尺寸：223mm ，ZYH: we have measured two samples, one of them is 116.5, and another one is ，ZYH: 3D has been updated to 115*223mm，ok

26 Closed 2015-12-21，ZYH: 3D has been updated to 46mm，ok
Closed Date: ZH The actual dimension here is 46mm 实际的尺寸是46mm , TBG: Completed 完成了 ，ZYH: 3D has been updated to 46mm，ok

27 Closed 2015-12-21，ZYH: 3D has been updated to M4*12 ok
ZH The actual screws used here is M4X12 Cross recessed pan head screw 实物使用的是M4X12十字盘头螺钉 Closed Closed Date: , TBG: Completed. Model M4X12.完成，模型是M4X10 ，ZYH: 3D has been updated to M4*12 ok

28 2015-12-14, TBG: Completed model.
Closed Closed Date: , TBG: Completed model. 完成模型

29 还是建议使用胫骨， 否则话， 所有的力都是直接施加在螺丝上面。 我们可以按着现在这样先进行，然后如果有需要的话，以后可以增加。
胡志勇 V型固定架与轮毂挤压或干涉 建议：加斜度、加筋 Closed Closed Date: : We agree. We saw this on the “boomerang” fixture we made for testing. We will revise the design and we will provide it for your review.我们同意，我在V型部件我们制作的测试夹具上发现了这个问题。我们将修改设计，同时我们会提供给你们回顾 Eric Hyp Still recommend using ribs, otherwise all forces are acting directly on the screws. We can keep as-is for now and add later if necessary. 还是建议使用胫骨， 否则话， 所有的力都是直接施加在螺丝上面。 我们可以按着现在这样先进行，然后如果有需要的话，以后可以增加。 Eric Hyp Closed. 关闭 : We are going to redesign this area with no ribs but allow enough clearance for the manufactured boomerang. 我们将重新设计这个地方，没有胫骨，但是有足够的空间给制作的V型部件。 , TBG: No Ribs. 没有筋骨 : Please provide production tolerances that are achievable as we wish to use this information when redesigning the channel for the boomerang. 请提供你们可以达到的生产间隙， 我们希望在重新设计这个V型部件槽的时候使用这个信息。 Eric Hyp Not yet updated. 还没有更新 , TBG: Completed.完成

30 Closed Closed Date: 2015-12-21 2015-12-11, TBG: Before… 之前
Eric Hyp Excessive interference between boomerang and wood panel U型和木头板有很多干涉 Closed Closed Date: , TBG: Before… 之前 , TBG: …and After. 之后 , TBG: See picture of modified boomerang, formed end is ‘shortened’ by 0.090”… 参见更改了V 型部件的图片， 成形的末端剪短了0.090”…

31 Assembly and wheel interference advice: increase the distance
胡志勇 装配时与轮盘干涉 建议：增加这个距离 Assembly and wheel interference advice: increase the distance Closed Closed Date: 轴转动 样品 : Do not deviate from the existing Floral Swivel Wall Mount design– other than the positive stop. We will correct the interference through a slight design change on the hub cap. 不要脱离之前以后的轴转动设计，　只是使其可以停止。　我们将通过稍微设计一下轮毂盖部件来更正这个间隙。　 ，ZYH: no interference issue, OK , TBG: Keep same production design as Floral Wall Mount. We added 0.200” spacing to the water-side hubcap to create clearance between the shroud screws /nuts and the faux-wood panel. This eliminates scratching. 保持和现在的花盘轴转动一样， 我们在水一侧轮毂盖子增加了0.200”的间隙来制造出轴套螺丝螺帽和木板之前的间隙， 这个可以消除划伤问题。 Eric Hyp 3D updated to match current production, but this causes a great deal of interference that needs to be addressed. See next page. 更新3D和现在生产的匹配，但是这个会导致很大的干涉需要解决， 参见下一页。

32 Closed Closed Date: ，ZHY: regular nuts are used in the 3D, we suggest to change to nylock nut as same as what we used for the floral hose reel . , AMES: OK

33 酒桶水车需要使用短一些的自攻螺钉，不然会干涉
Closed Closed Date: : Why change to a different screw? Use the same as used in the Floral Swivel production product. 为什么更改为不同的螺丝呢？使用和生产的老轴转动一样的螺丝 ZH：酒桶水车无法使用M5X30的自攻螺钉，因为里面会干涉；而以前轴转动的轮毂结构是不会干涉的。ZH: barrel of water tankers cannot use the self-tapping screws M5X30, because it will interfere with shaft before wheel structure will not interfere. 胡志勇 酒桶水车需要使用短一些的自攻螺钉，不然会干涉 Wine bucket of water you need to use shorter screws or interfere , TBG: Completed- shorter screws and ‘back’ tubular holes removed. The hub tube design cannot match the Floral Wall Mount due to the boomerangs and altered flange design. 完全短的螺丝和黑色管状孔去掉了。 轮毂管的设计和现在的花盘版本不能匹配因为这个V型部件和更改的轮盘设计。 Eric Hyp Not yet updated. Current 3D is still M6 还没有更新， 现在还是M6的3D : We are looking into this. Our desire is to match the design as on the Floral Wall mount. Please update the 3-D and provide as-soon-as-possible. 我们在看这个方面　我们希望这个设计可以和老的轴转动匹配。　请更新３Ｄ并尽快的提供。　 We look at this we hope this design can match the old shaft. Please update 3D as soon as possible and to provide ZH：好的。我们会明天提供给你 Eric Hyp 3D already sent. 3D已经发送了

34 Eric Hyp Screw sizes incorrect…looks like a SW Toolbox issue. Eric Hyp Screw sizes incorrect…looks like a SW Toolbox issue. 螺丝的大少不对。好像是工具箱的问题。 , TBG: The hardware 3-D models supplied by ZH were all put into place. ZH提供的五金3D模型都放到合适位置是上。 Closed Closed Date:

35 2015-12-21, AMES: Revised, again. Please verify.
Closed Closed Date: ，ZHY: 3D has been updated. This self-tapping screw is too much long, we suggest to use ST4.8*15, rather than ST4.8*32 used on 3D. , AMES: Revised, again. Please verify. 修订后，再次。请验证。

36 Closed Closed Date: 2015-12-21 2015-12-11, TBG: Added. 增加了
胡志勇 周边被刮伤 建议：加垫片 杜伟勋 新的3D里面没有垫片 : Ok, no problem. OK, 没有问题 , TBG: Added. 增加了 Eric Hyp Not yet updated. 还没有更新 ，ZHY: washers have been added here. OK

37 Closed Closed Date: 2015-12-21 2015-12-11, TBG: Yes, remove. 是的， 去掉。
Eric Hyp We’re eliminating this part, right? 这个零件最后不要把。 Closed Closed Date: , TBG: Yes, remove. 是的， 去掉。 ，ZHY: this part has been moved away. OK Eric Hyp Where did this interference come from? 这个干涉是从哪里过来了？ , TBG: This was legacy from the original Floral design, not updated until now. The wall mount tube length was corrected to match production. 这个是从之前老的花盘的设计继承来的， 到现在没有更新。 这个壁挂管的长度已经更正了和生产的尺寸匹配

38 Closed Closed Date: 2015-12-21 2015-12-11, TBG: Completed. 完成了
胡志勇 3D上没有隔圈 建议：增加这个零件 Eric Hyp Not yet updated. 没有更新 , TBG: Completed. 完成了 ，ZHY: OK : This should match the production Floral Swivel Wall Mount. Use the same size screws. We will revise the hub to accommodate. 这个应该和生产的轴转动匹配，使用一样尺寸的螺丝，我们会更改轮毂来调整

39 Closed Closed Date: : We are not interested in these revisions at this time. Do not change. 我们现在对这些版本不感兴趣，不要更改 胡志勇 椭圆管摆动较大 建议改成这样，同时增加了成本 Oval tube swing large Proposed as such, while increasing the costs Eric Hyp We’re open to other suggestions to eliminate the play in this system. 我们也很高兴收到其它的建议来消除这个系统的晃动问题 , TBG: There is no play in this joint. Do not change. 这个链接地方没有晃动， 不要更改

40 Closed Closed Date: : We are not interested in these revisions at this time. Do not change. 我们现在对这些版本不感兴趣，不要更改 Eric Hyp We’re open to other suggestions to eliminate the play in this system. 我们也很高兴收到其它的建议来消除这个系统的晃动问题 , TBG: Although there is play in this joint, do not change at this time.这个链接地方没有晃动， 不要更改 胡志勇 因为左右会有间隙，所以下轴座和旋钮之间摆动比较大 建议：增加斜度 Around because there will be clearance between shaft and knob swing large Recommendation: reinforce slope

41 Eric Hyp We’re open to other suggestions to eliminate the play in this system. 我们也很高兴收到其它的建议来消除这个系统的晃动问题 : We are not interested in these revisions at this time. Do not change. 我们现在对这些版本不感兴趣，不要更改 Closed Closed Date: , TBG: Although there is play in this joint, do not change at this time. 尽管这个链接地方有晃动，但是现在不要更改 以前左右间隙比较大，所以上轴座和旋钮之间摆动比较大 建议：改成这样 About before clearance is relatively large, so the axis between the knob and big swing Suggestion: change

42 2015-12-11, TBG: Go with black zinc in production, but please provide costs to powder coat.
在批量生产中使用黑色镀锌，但是请提供喷塑螺丝的成本 : We are OK with the black zinc but please advise cost of the powder coated version. 我们觉得镀黑色是ＯＫ，　但是请告知喷塑的版本成本 Eric Hyp After 3 weeks, the only survivor is the anodized aluminum coupling. 一、马车螺钉有两种表面处理 1.一种是样品上装的：表面镀黑锌。 2.另一种是分开包的：表面喷塑。 二、马车螺钉本来有两种长度，现更改为一种长度（短的） Closed Closed Date: : We are awaiting your feedback on the alternate finishes for corrosion resistance versus using Teflon tape. 我们等待你们的回复对于防锈的表面处理和生料带使用的选择 , TBG: Keep water system as is- but see note “D.” below. No Teflon tape. 保持水系统如现在这样， 参见下面的注释D， 不适用生料带 水系统与铜件连接后生锈问题的实验还做进行中，暂时还没有结果。 关于包装，我们还在考虑。 , TBG: No drill bits to be included. 不要包含钻头 Any new plastic components are to have a MT texture or equivalent– same as on the existing shrouds.任何的新的塑料部件使用MT 纹理或者是同等类似和现在轴套上的一样。 The lock-cap and knob are very ‘sticky’– they do not want to lift and turn freely. Is this due to the paint that you used? Would it be possible to send us 3 samples that have been powder-coated (instead of spray-painted over-top of the copper-colored powder coat)? 锁盖和结很粘-他们不好拉起和自由转动， 这个是不是因为你们使用的喷涂问题？是不是可以邮寄3个已经喷塑的样品给我们（不要铜颜色喷塑上从上喷漆的方式） The water system for the Whiskey Barrel wall mount is to be silver. 柳条壁挂的水系统是银色。 The pre-printed panel dents were a result of a tooling error on the prototype and will be corrected for production. 手板上预喷涂板在模具问题中导致凹坑， 在生产中要更正 : We are awaiting your feedback on the final packaging design that will allow us to pass ISTA 1A testing. 我们等待你们关于最后包装设计的回复，　包装要可以通过ＩＳＴＡ　１Ａ的测试 塑料件表面纹理需要跟客户确定。 : Drill bit TBD.　钻头待定 We will provide plastic texture.我们会提供塑料纹理 The knob does not turn freely on the prototypes. This needs to be addressed for production.　这个结在手板上不能自由的转动。　这个需要在生产总改善 The water system needs to be painted silver to match the other NeverLeak water systems.　水系统需要喷涂为银色和现在的其它铝水系统的相配 The pre-printed panels exhibit dents, probably where held during forming. These need to be eliminated for production. Let’s discuss.这个预喷涂板子显示了凹坑，　在成型的时候这个位置固定过，　这个需要在生产中消除，　让我们讨论一下 Eric Hyp Prototype foam in process , TBG: AMES needs feedback and direction with costs as soon as possible. AMES需要尽快的告知成本的方向

43 2015-12-11, TBG: All erroneous features are deleted from the models.
Closed Closed Date: Eric Hyp Delete old brackets. 删掉老的支架。 , TBG: All erroneous features are deleted from the models. 所有的错误特征都从这个模型中删除 ，ZHY: the old brackets have been moved away

44 Closed Closed Date: Eric Hyp Should be nylok nut. 这个应该是防松螺母。 Eric Hyp Double-check screw length 再确定一些螺钉的长度。 , TBG: The hardware 3-D models supplied by ZH were all put into place. ZH提供的五金3D模型都放到合适位置是上。 增加了发送螺母

45 Closed Closed Date: Eric Hyp Delete inner hole on tubing. 里边的孔不要。 , TBG: Completed- shorter screws and ‘back’ tubular holes removed. The hub tube length and hole position cannot match the Floral Wall Mount due to the boomerangs and altered flange design. 完成的短螺丝和黑色的管状孔都去掉。 这个轮毂长度和孔的位置因为V型部件和更改的轮盘设计和在花版本不匹配了 去掉了轮毂管内部的孔， 减少了螺丝的 长度从ST5X30mm到ST5 X 15mm

46 Eric Hyp Problems from Amazon. 亚马逊上的问题 Closed Closed Date: : We have never had an issue with the locking latch falling off. It has always been a tight fit with no customer complaints. 我们从来没有这个锁销掉落的问题，　因为这个总是配合的很紧，没有任何客人投诉 Eric Hyp Need to reconsider this issue. Alternative solution: increase retention of the locking latch. 需要重新考虑这个问题， 选择的处理方案是增加锁扣的扣位部件 : Do not change. Leave the as-is, do not assemble up side down. 不要更改，　保持之前这样就好，　不要反装 , TBG: Keep as-is. Do not turn up-side-down due to the lack of clearance for the hose fitting. AMES is unable to duplicate this failure mode. 如现在的设计， 不要调转方向，因为这个管子接头的间隙会太小， AMES没有办法复制这个错误的模型

47 Closed Issues 已关闭

48 Will not make this change. Waiting for other resolution.
胡志勇 螺丝会刮伤木纹板 建议：抽孔攻牙 : This should match the production Floral Swivel Wall Mount. Use the same size screws. We will revise the hub to accommodate. As on Issue 5, this issue will be corrected by a slight design change of the Hub Cap. 这个应该和现有的轴转动匹配。　使用同样的螺丝。我们将更改轮毂来调节。　对于问题５，　这个问题我们将稍微设计一下轮毂盖来更正这个问题。 Closed Closed by: Eric Hyp Date: Eric Hyp Will not make this change. Waiting for other resolution.

49 Closed Closed by: Eric Hyp Date: 2015-12-10
胡志勇 整体装配后，木纹的色差不明显，正面看起来缺少立体感考虑找一种笔在木纹板上筋凹进去的地方画一条线，只对靠外的一侧进行画线。同时我们会对它做盐雾及UV测试。 注：成本预计增加0.5元/台。成本包括人工及笔的费用。 : Do not add. Too costly and not worth it.不要增加，　太贵了，没有价值

50 Closed Closed by: Eric Hyp Date: 2015-12-10
胡志勇 把固定座改成这样，并更改这种螺丝 Closed Closed by: Eric Hyp Date: : Do not change. Keep as-is same as Floral Swivel WM. 不要更改，　保持和之前轴转动一样就好。

51 Closed Closed by: Eric Hyp Date: 2015-12-10 2015-12-02: Do not change.
胡志勇 因为螺纹直接与零件接触 我们有意向改成子母螺钉 Closed Closed by: Eric Hyp Date: : Do not change. 不要更改

52 Closed Closed by: 杜伟勋 Date: 2015-12-10
胡志勇 三角片焊接工艺繁多复杂 建议改成这样 Closed Closed by: 杜伟勋 Date: : Do not change the Swivel Arm Tube or welded axle piece. We will change the hub to accommodate. 不要更改转动臂管或者是焊接轴部件。　我们将更改轮毂来调节。

53 Closed Closed by: Eric Hyp Date: 2015-12-08 Eric Hyp 2015-12-08
Comment. Closed Closed by: Eric Hyp Date: Eric Hyp Comment. Eric Hyp Comment. Eric Hyp Comment. Eric Hyp Comment. Eric Hyp Final resolution. Eric Hyp Cancelled.