IEEE的實務應用 與投稿經驗分享 柯明道, Morris (Ming-Dou) Ker Invited Talk in IEEE 2013 Taiwan Academic Seminars IEEE的實務應用 與投稿經驗分享 柯明道, Morris (Ming-Dou) Ker (1) Editor, Trans. on Device and Materials Reliability (2) 國立交通大學 光電學院 院長 (3) 國立交通大學 電子工程學系 特聘教授 May 28, 2013 1
光電學院 @交通大學台南分部 位於高速鐵路台南車站東側約500公尺處。 已開發區 (8.2公頃) 位於高速鐵路台南車站東側約500公尺處。 交通大學台南分部第一期校地面積為8.2公頃(原為台糖土地),由台南縣政府編列2.23億元協助取得。
柯明道教授 Prof. Morris (Ming-Dou) Ker 現職: 交通大學 光電學院 院長 交通大學 電子工程學系/電子研究所 特聘教授 交通大學 『智慧型彷生系統研究中心』 主任 行政院 『奈米國家型科技計畫』執行長 義守大學 講座教授(合聘) 資歷: (1) 義守大學 副校長(借調), 2008-2011. (2) 行政院 『晶片系統國家型科技計畫』執行長 . (3) 傑出工程教授, 2009. (4) 中華民國『十大傑出發明家』, 2009. (5) IEEE FELLOW, 2008. (6) 國家發明創作獎, 2005. (7)中華民國『十大傑出青年』, 2003. (8) 台灣靜電放電防護工程學會-- 創會理事長. (9) 工研院電通所 --工程師/課長/副理/經理. 學歷: 交通大學/電子工程學系學士/電子研究所碩士/電子研究所博士
Outline IEEE 論文撰稿 (Manuscript) IEEE 期刊投稿 (Submission) IEEE 期刊審稿 (Editor / Reviewers) IEEE 期刊答辯 (Revision) Some Experiences
論文撰稿 -- IEEE Two-Column Format http://www.ieee.org/publications_standards/publications/authors/author_templates.html#sect1
論文撰稿 -- Figure Fig. 5. Architecture and circuit blocks of the DPSK demodulator.
論文撰稿 -- Figure 要注意彩色線條印刷成 white-and-black 時的可鑑別度,尤其是有多線條時。 Fig. 1. Magnetization as a function of applied field. 要注意彩色線條印刷成 white-and-black 時的可鑑別度,尤其是有多線條時。 使用 不同 symbols 以及 空心/實心 標示方式,可以清楚顯示線條之不同。
論文撰稿 -- Table Tables should be numbered with Roman Numerals.
論文撰稿 -- Acknowledgment “Acknowledgment” v.s. “Acknowledgement” The preferred spelling of the word “acknowledgment” in American English is without an “e” after the “g.” Use the singular heading even if you have many acknowledgments. In most cases, sponsor and financial support acknowledgments are placed in the unnumbered footnote on the first page, not here. The footnote on the first page :
論文撰稿 -- References Number citations consecutively in square brackets [1]. The sentence punctuation follows the brackets [2]. Multiple references [2], [3] are each numbered with separate brackets [1]–[3]. Example: Several approaches that target anatomically different regions of the visual pathway have been pursued, including visual cortex [1], [2], optic nerve [3], [4], and retina [5]–[13]. Several reliability issues had been reported, such as gate-oxide overstress [2]-[5], hot-carrier degradation [6], and the undesired leakage current paths [7], [8].
論文撰稿 – References (IEEE Format) 期刊論文 研討會論文 期刊論文 研討會論文 期刊論文 研討會論文 期刊論文
論文撰稿 – References (IEEE Format) 研討會論文 期刊論文 期刊論文 期刊論文 期刊論文 期刊論文 研討會論文
論文撰稿 – References (IEEE Format) Authors人數不同,標點符號也有分別: M.-D. Ker, “Whole-chip ESD protection design with efficient VDD-to-VSS ESD clamp circuits for submicron CMOS VLSI,” IEEE Trans. Electron Devices, vol. 46, no. 1, pp. 173-183, Jan. 1999. M. Baze, “Output buffer impedance control and noise reduction using a speed-locked loop,” in IEEE Int. Solid-State Circuits Conf. Dig. Tech. Papers, 2004, pp. 486–487. M.-D. Ker and J.-H. Chen, “Self-substrate-triggered technique to enhance turn-on uniformity of multi-finger ESD protection devices,” IEEE J. Solid-State Circuits, vol. 41, no. 11, pp. 2601-2609, Nov. 2006. T. J. Maloney and W. Kan, “Stacked PMOS clamps for high voltage power supply protection,” in Proc. EOS/ESD Symp., 1999, pp. 70-77. J. Li, R. Gauthier, and E. Rosenbaum, “A compact, timed-shutoff, MOSFET-based power clamp for on-chip ESD protection,” in Proc. EOS/ESD Symp., 2004, pp. 273-279. P.-Y. Wang, J.-H. Zhan, H.-H. Chang, and H.-M. Chang, “A digital intensive fractional-N PLL and all-digital self-calibration schemes,” IEEE J. Solid-State Circuits, vol. 44, no. 8, pp. 2182–2192, Aug. 2009. S.-K. Shin, S.-M. Jung, J.-H. Seo, M.-L. Ko, and J.-W. Kim, “A slew-rate controlled output driver using PLL as compensation circuit,” IEEE J. Solid-State Circuits, vol. 38, no. 7, pp. 1227-1233, Jul. 2003.
論文撰稿 – Author Biography IEEE T-DMR IEEE T-ED
Outline IEEE 論文撰稿 (Manuscript) IEEE 期刊投稿 (Submission) IEEE 期刊審稿 (Editor / Reviewers) IEEE 期刊答辯 (Revision) Some Experiences
論文投稿 -- ScholarOne Manuscripts
論文投稿 -- ScholarOne Manuscripts
論文投稿 -- ScholarOne Manuscripts
論文投稿 -- ScholarOne Manuscripts
論文投稿 -- ScholarOne Manuscripts
論文投稿 -- ScholarOne Manuscripts
論文投稿 -- ScholarOne Manuscripts Cover page of the submitted manuscript :
Outline IEEE 論文撰稿 (Manuscript) IEEE 期刊投稿 (Submission) IEEE 期刊審稿 (Editor / Reviewers) IEEE 期刊答辯 (Revision) Some Experiences
期刊審稿 – Editor如何找Reviewers
期刊審稿 – Editor如何找Reviewers Find the active reviewers from the Authors of References in the submitted manuscript. 3 ~ 5 reviewers for each submitted manuscript.
期刊審稿 – What will be done by Reviewer?
期刊審稿 – What will be done by Reviewer?
期刊審稿 – What will be done by Reviewer?
Plagiarism Checking (抄襲檢查)
期刊審稿 – Editor Decision / Recommendation 檢察所有 Reviewers 的審查意見與 建議,接受與否採多數決。 若有必要再額外增加 Reviewer 來審查.
Outline IEEE 論文撰稿 (Manuscript) IEEE 期刊投稿 (Submission) IEEE 期刊審稿 (Editor / Reviewers) IEEE 期刊答辯 (Revision) Some Experiences
期刊答辯 – One-by-one Answer to Each Comment
期刊答辯 – One-by-one Answer to Each Comment
期刊答辯 – One-by-one Answer to Each Comment
期刊答辯 – Marked the revisions in the Manuscript
Notice of IEEE Proof
IEEE Proof
Corrections on the IEEE Proof
Corrections on the IEEE Proof
PAGE CHARGES: For all papers published in T-ED, there are voluntary PAGE CHARGES of $110.00 per page. We have noted a significant decrease in authors’ willingness to pay voluntary page charges. The outstanding reputation and high quality of T-ED depends in part on the collection of these charges. Please by all means attempt to have the voluntary page charges paid. If these optional sustaining page charges are paid, one hundred reprints of your article will be provided. COLOR figures will automatically be posted in color on the IEEE Xplore website free of charge. However, due to the different material and processing techniques used, if you prefer your figures to appear in color in the printed version, there will be a charge of $1045.00 for every 4 pages or less containing color figures plus an additional cost of $62.50 for each color figure.
Outline IEEE 論文撰稿 (Manuscript) IEEE 期刊投稿 (Submission) IEEE 期刊審稿 (Editor / Reviewers) IEEE 期刊答辯 (Revision) Some Experiences
How to become Editor in IEEE? The Editor is NOT a reviewer to a submitted manuscript, but he/she can select the suitable active reviewers (3 ~ 5 persons) to review the submitted manuscript. Long-lasting publications on some technical topic in the Transactions / Journals of a Society (such as IEEE). Long-lasting services (TPC member, Session Chair, Reviewer, …) in a Society. Make yourself to be well known by the Editor-in- Chief, and/or other Editors (or Associate Editors). “Contact through Services” – the way that can bring you to be well known by the them.
Summary 瞭解IEEE期刊論文的基本撰稿格式,IEEE期刊論文 的審查流程,以及答辯文稿的適當回應(Reviewer’s Comments),能夠縮短論文的審理作業時間,即早 讓論文順利刊登發表。 站在 Reviewer 的角度來看你自己的論文,你將更能 夠說服他們來同意接受你的論文刊登。 讓你的論文能夠通過IEEE期刊嚴格的審查後被接受 刊登,主要因素是你論文的論述深度以及技術數據 (with Solid data),而不是依靠寫作技巧。 學海無涯,唯勤是岸。
篳路開基 交大先鋒 Q & A 47