WisPLC GET STARTED NOW! 1.Download NetPerSec：http://www.rakwireless.com/cn/download/WisPLC/%E8%BD%AF%E4%BB%B6%E5%BC%80%E5%8F%91 2.ping network mode (2 computer puzzle) Connect the two modules in a direction by using twisted wires or power lines,Connect the power adapter module by 12V,Connect the module to the computer through the network cable,After power on, the module IP address is changed under the same gateway; Run iperf in Windows,First establish the receiver,import iperf -s -w -64k -i 10 server,Build the transmitter,import iperf -c (sender IP address) -w -64k -P 10 -i 10 -t99999999; 3.Open the NetPerSec.exe tool to see the real-time transfer rate; 4.After testing the PASS, the product can be applied according to the actual requirement; Support Center：supportcn.rakwireless.com Github Code：www.github.com/rakwireless Wiki Document：wiki.rakwireless.com
WisPLC 快速上手 1.下载NetPerSec：http://www.rakwireless.com/cn/download/WisPLC/%E8%BD%AF%E4%BB%B6%E5%BC%80%E5%8F%91 2.拼网模式（2台电脑拼网方式） 使用双绞线或者电力线将两个模块按方向连接，通过12V电 源适配器连接模块，通过网线将模块与电脑连接，上电后将模块IP地址修改在同一网关下）； 在Windows中运行iperf，先建立接收端，输入iperf -s -w -64k -i 10 server，再建发送端，输入iperf -c （发送端IP地址） -w -64k -P 10 -i 10 -t99999999； 3.打开NetPerSec.exe工具查看实时传输速率； 4.测试PASS后可以根据实际需求进行产品应用； 支持中心：supportcn.rakwireless.com 源码下载：www.github.com/rakwireless Wiki 文档：wiki.rakwireless.com