MPLAB IDE 8 建立專案
Project->Project Wizard->下一步
下一步
下一步again
點選Browse ->建立專案資料 夾和專案檔 ->下一步
Add 18f452_g.lkr ->下一步 (路徑C:\Program Files\Microchip\MPASM Suite\LKR)
完成
Project ->Add New File to Project ->在專案下建立.asm檔案
在.asm 撰寫程式碼
模擬
View->Watch->type address and watch the content of address you choose
View->Program memory
Debugger->Select tool->MPLAB SIM
燒錄
裝置
Configuration->Configuration Bits ->取消勾選Configuration Bits set in code ->OSC selection bits -> HS oscillator
Programmer ->Select Programmer ->PICkit 3
按Ok後 output detected device
編譯/燒錄 2.Program 1.Build All
板子使用完畢記得… 1.Erase Flash Device 2.Blank Check All